What problems should be paid attention to when using the single shaft shredder blade

1. Ensure the normality of the machine

In order to make the single-shaft shredder blade work normally, exert a powerful cutting effect, and create accurate working standards and effects, we must first ensure the normality of the shredder, so the most important thing for us before work is Carry out an overall inspection of the shredder, especially the safety performance of some important operating parts, especially whether the lubricating effect of the claws, hammers, blades, etc. is normal, because these are directly related to the normal operation of the shredder. Work.

2. Grasp the blade and temperature of the shredder during use

In the process of using the shredder, our construction personnel must have a high degree of professional skills, and sometimes we must pay great attention to the operation of the single-shaft shredder blade. Replacing the cutting edge ensures the normal operation of the work, and when we work overloaded, the temperature of the machine will be too high and the waste will be sprayed out. At this time, obstacles should be removed in time.

3. Pay attention to details after troubleshooting

When we encounter a problem with the shredder and get the corresponding treatment, we do not fill it immediately, but let the blade of the single-shaft shredder idle for a few seconds. If the immediate filler is too low in the mechanical speed, it will damage the equipment, and then there is the If you can't change the belt at will, it will cause the speed to be too fast, which will cause the temperature to rise and explode.

Fourth, it is very important to strengthen the inspection blade during the work process

When the cutting work is carried out for a long time, we must pay attention to stop regularly to reinforce the blade and the power machine. Unexpected accidents occur. If it is a long-term flow operation, the single-shaft shredder blade must be placed on the machine base, so that It is more stable, and it is more convenient and safe to work. Therefore, if the passivation of the cutting edge or the occurrence of cracking, curling, or opening is found in the process, the blade must be replaced in time, so as to ensure the smooth completion of the work. High standard of segmentation.

News

Center

News Center